Abdalla, M.M., Ali, I.A.A., Khan, K., Mattheos, N., Murbay, S., Matinlinna, J.P., Neelakantan, P. (2021) The Influence of Surface Roughening and Polishing on Microbial Biofilm Development on Different Ceramic Materials. Journal of Prosthodontics. 30: 447 – 453.
Abdulmajeed, A. A., Lim, K. G., Närhi, T. O. & Cooper, L. F. (2016) Complete-arch implant-supported monolithic zirconia fixed dental prostheses: A systematic review. Journal of Prosthetic Dentistry 115: 672 – 677.e1.
Abou-Ayash, S., Strasding, M., Rücker, G. & Att, W. (2017) Impact of prosthetic material on mid- and long-term outcome of dental implants supporting single crowns and fixed partial dentures: A systematic review and meta-analysis. European Journal of Oral Implantology 10 Suppl 1: 47 – 65.
Aglietta, M., Siciliano, V. I., Zwahlen, M., Brägger, U., Pjetursson, B. E., Lang, N. P., et al. (2009) A systematic review of the survival and complication rates of implant supported fixed dental prostheses with cantilever extensions after an observation period of at least 5 years. Clinical Oral Implants Research 20: 441 – 451.
AlTarawneh, S., Thalji, G. & Cooper, L. (2021) Full-arch implant-supported monolithic zirconia fixed dental prostheses: An updated systematic review. International Journal of Oral Implantology 14: 13 – 22.
Ambré, M.J., Aschan, F. & Vult von Steyern, P. (2013) Fracture strength of yttria-stabilized zirconium-dioxide (Y-TZP) fixed dental prostheses (FDPs) with different abutment core thicknesses and connector dimensions. Journal of Prosthodontics 22: 377–382.
Bakitian, F., Seweryniak, P., Papia, E., Larsson, C. & Vult von Steyern, P. (2019). Load-Bearing Capacity of Monolithic Zirconia Fixed Dental Prostheses Fabricated with Different Connector Designs and Embrasure Shaping Methods. Journal of Prosthodontics 28: 64 – 70.
Barootchi, S., Askar, H., Ravidà, A., Gargallo-Albiol, J., Travan, S. & Wang, H.-L. (2020) Long-term Clinical Outcomes and Cost-Effectiveness of Full-Arch Implant-Supported Zirconia-Based and Metal-Acrylic Fixed Dental Prostheses: A Retrospective Analysis. International Journal of Oral & Maxillofacial Implants 35: 395 – 405.
Belser, U.C., Grütter, L., Vailati, F., Bornstein, M.M., Weber, H.-P. & Buser, D. (2009) Outcome evaluation of early placed maxillary anterior single-tooth implants using objective esthetic criteria: a cross-sectional, retrospective study in 45 patients with a 2- to 4-year follow-up using pink and white esthetic scores. Journal of Periodontology 80: 140 – 151.
Bidra, A.S., Rungruanganunt, P. & Gauthier, M. (2017) Clinical outcomes of full arch fixed implant-supported zirconia prostheses: A systematic review. European Journal of Oral Implantology 10 Suppl 1: 35 – 45.
Brakel, R. van, Noordmans, H. J., Frenken, J., de Roode, R., Wit, G. C. de, & Cune, M. S. (2011) The effect of zirconia and titanium implant abutments on light reflection of the supporting soft tissues. Clinical Oral Implants Research 22: 1172 – 1178.
Bressan, E., Paniz, G., Lops, D., Corazza, B., Romeo, E. & Favero, G. (2011) Influence of abutment material on the gingival color of implant-supported all-ceramic restorations: a prospective multicenter study. Clinical Oral Implants Research 22: 631 – 637.
Candido, L. M., Miotto, L. N., Fais, L., Cesar, P. F. & Pinelli, L. (2018) Mechanical and Surface Properties of Monolithic Zirconia. Operative Dentistry 43: E119 – E128.
Delucchi, F., De Giovanni, E., Pesce, P., Bagnasco, F., Pera, F., Baldi, D. et al. (2021) Framework Materials for Full-Arch Implant-Supported Rehabilitations: A Systematic Review of Clinical Studies. Materials 14: 3251.
Esquivel-Upshaw, J. F., Kim, M. J., Hsu, S. M., Abdulhameed, N., Jenkins, R., Neal, D. et al. (2018) Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns. Journal of Dentistry 68: 19 – 27.
Fehmer, V., Mühlemann, S., Hämmerle, C. H. F. & Sailer, I. (2014) Criteria for the selection of restoration materials. Quintessence International 45: 723 – 730.
Fürhauser, R., Florescu, D., Benesch, T., Haas, R., Mailath, G. & Watzek, G. (2005) Evaluation of soft tissue around single-tooth implant crowns: the pink esthetic score. Clinical Oral Implants Research 16: 639 – 644.
Hafezeqoran, A., Koodaryan, R., Hemmati, Y. & Akbarzadeh, A. (2020) Effect of connector size and design on the fracture resistance of monolithic zirconia fixed dental prosthesis. Journal of Dental Research, Dental Clinics, Dental Prospects 14: 218 – 222.
Hamza, T.A., Attia, M. A., El-Hossary, M. M. K., Mosleh, I. E., Shokry, T. E. & Wee, A. G. (2016) Flexural strength of small connector designs of zirconia-based partial fixed dental prostheses. Journal of Prosthetic Dentistry 115: 224 – 229.
Happe, A., Röling, N., Schäfer, A. & Rothamel, D. (2015) Effects of different polishing protocols on the surface roughness of Y-TZP surfaces used for custom-made implant abutments: a controlled morphologic SEM and profilometric pilot study. Journal of Prosthetic Dentistry 113: 440 – 447.
Happe, A., Schulte-Mattler, V., Strassert, C., Naumann, M., Stimmelmayr, M., Zoller, J. E. et al. (2013) In vitro color changes of soft tissues caused by dyed fluorescent zirconia and nondyed, nonfluorescent zirconia in thin mucosa. International Journal of Periodontics and Restorative Dentistry 33: e1 – 8.
Heintze, S. D. & Rousson V. (2010) Survival of zirconia- and metal-supported fixed dental prostheses: a systematic review. International Journal of Prosthodontics 23: 493 – 502.
Heintze, S.D., Monreal, D., Reinhardt, M., Eser, A., Peschke, A., Reinshagen, J. et al. (2018) Fatigue resistance of all-ceramic fixed partial dentures – Fatigue tests and finite element analysis. Dental Materials 34: 494 – 507.
Ishikawa-Nagai, S., Da Silva, J. D., Weber, H. P. & Park, S. E. (2007) Optical phenomenon of peri-implant soft tissue. Part II. Preferred implant neck color to improve soft tissue esthetics. Clinical Oral Implants Research 18: 575 – 580.
Jaeggi, M., Gyr, S., Astasov-Frauenhoffer, M., Zitzmann, N. U., Fischer, J. & Rohr, N. (2022) Influence of different zirconia surface treatments on biofilm formation in vitro and in situ. Clinical Oral Implants Research. doi: 10.1111/clr.13902 Epub ahead of print.
Janyavula, S., Lawson, N., Lawson, N., Cakir, D., Beck, P., Ramp, L. C., et al. (2013) The wear of polished and glazed zirconia against enamel. Journal of Prosthetic Dentistry 109: 22 – 29.
Jemt, T., Bergendal, B., Arvidson, K., Bergendal, T., Karlsson, L. D. S. d U., Linden, B. et al. (2002) Implant-supported welded titanium frameworks in the edentulous maxilla: a 5-year prospective multicenter study. International Journal of Prosthodontics 15: 544 – 548.
Joda, T. & Brägger, U. (2015) Digital vs. conventional implant prosthetic workflows: a cost/time analysis. Clinical Oral Implants Research 26: 1430 – 1435.
Jung, R. E., Holderegger, C., Sailer, I., Khraisat, A., Suter, A. & Hämmerle, C. H. F. (2008) The effect of all-ceramic and porcelain-fused-to-metal restorations on marginal peri-implant soft tissue color: a randomized controlled clinical trial. International Journal of Periodontics and Restorative Dentistry 28: 357 – 365.
Jung, R. E., Sailer, I., Hämmerle, C. H. F., Attin, T. & Schmidlin, P. (2007) In vitro color changes of soft tissues caused by restorative materials. International Journal of Periodontics and Restorative Dentistry 27: 251 – 257.
Jung, R. E., Zembic, A., Pjetursson, B. E., Zwahlen, M. & Thoma, D. S. (2012) Systematic review of the survival rate and the incidence of biological, technical, and aesthetic complications of single crowns on implants reported in longitudinal studies with a mean follow-up of 5 years. Clinical Oral Implants Research 23 Suppl 6: 2 – 21.
Karasan, D., Att, W., Sailer, I. & Canay, S. (2021) Mechanical Stability of Zirconia Implant Abutments Supporting Cantilevered Fixed Dental Prostheses After Fatigue Loading. International Journal of Prosthodontics 34: 615 – 625.
Kurbad, A. (2016) Microveneering technique for esthetic enhancement of monolithic zirconia restorations. International Journal of Computerized Dentistry 19: 165 – 178.
Kwon, S. J., Lawson, N. C., McLaren, E. E., Nejat, A. H. & Burgess, J. O. (2018) Comparison of the mechanical properties of translucent zirconia and lithium disilicate. Journal of Prosthetic Dentistry 120: 132 – 137.
Lawson, N.C., Janyavula, S., Syklawer, S., McLaren, E.A. & Burgess, J.O. (2014) Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing. Journal of Dentistry 42: 1586 – 1591.
Lemos, C. A. A., Verri, F. R., De Luna Gomes, J. M.., De Souza Batista, V. E., Cruz, R. S., Oliveira, H. F. F. E., et al. (2019) Ceramic versus metal-ceramic implant-supported prostheses: A systematic review and meta-analysis. Journal of Prosthetic Dentistry 121: 879 – 886.e4.
Marchand, L., Sailer, I., Lee, H., Mojon, P. & Pitta, J. (2021) Digital wear analysis of different CAD/CAM fabricated monolithic ceramic implant-supported single crowns using two optical scanners. International Journal of Prosthodontics: Online ahead of print.
Matzinger, M., Hahnel, S., Preis, V. & Rosentritt, M. (2019) Polishing effects and wear performance of chairside CAD/CAM materials. Clinical Oral Investigations 23: 725 – 737.
Menini, M., Conserva, E., Tealdo, T., Bevilacqua, M., Pera, F., Signori, A., et al. (2013) Shock absorption capacity of restorative materials for dental implant prostheses: an in vitro study. International Journal of Prosthodontics 26: 549 – 556.
Mühlemann, S., Benic, G. I., Fehmer, V., Hämmerle, C. H. F. & Sailer, I. (2019) Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic posterior fixed partial dentures. Part II: Time efficiency of CAD-CAM versus conventional laboratory procedures. Journal of Prosthetic Dentistry 121: 252 – 257.
Mühlemann, S., Kraus, R. D., Hämmerle, C. H. F. & Thoma, D. S. (2018) Is the use of digital technologies for the fabrication of implant-supported reconstructions more efficient and/or more effective than conventional techniques: A systematic review. Clinical Oral Implants Research 29 Suppl 18: 184 – 195.
Passos, S. P., Torrealba, Y., Major, P., Linke, B., Flores-Mir, C. & Nychka, J. A. (2014) In vitro wear behavior of zirconia opposing enamel: a systematic review. Journal of Prosthodontics 23: 593 – 601.
Pieralli, S., Kohal, R.-J., Rabel, K., von Stein-Lausnitz, M., Vach, K. & Spies, B.C. (2018) Clinical outcomes of partial and full-arch all-ceramic implant-supported fixed dental prostheses. A systematic review and meta-analysis. Clinical Oral Implants Research 29 Suppl 18: 224 – 236.
Pjetursson, B. E., Sailer, I., Latyshev, A., Rabel, K., Kohal, R.-J. & Karasan, D. (2021) A systematic review and meta-analysis evaluating the survival, the failure, and the complication rates of veneered and monolithic all-ceramic implant-supported single crowns. Clinical Oral Implants Research 32 Suppl 21: 254 – 288.
Pjetursson, B. E., Valente, N. A., Strasding, M., Zwahlen, M., Liu, S. & Sailer, I. (2018) A systematic review of the survival and complication rates of zirconia-ceramic and metal-ceramic single crowns. Clinical Oral Implants Research 29 Suppl 16: 199 – 214.
Rabel, K., Spies, B.C., Pieralli, S., Vach, K. & Kohal, R.-J. (2018) The clinical performance of all-ceramic implant-supported single crowns: A systematic review and meta-analysis. Clinical Oral Implants Research 29 Suppl 18: 196 – 223.
Rues, S., Kappel, S., Ruckes, D., Rammelsberg, P. & Zenthöfer, A. (2020) Resistance to Fracture in Fixed Dental Prostheses Over Cemented and Screw-Retained Implant-Supported Zirconia Cantilevers in the Anterior Region: An In Vitro Study. International Journal of Oral & Maxillofacial Implants 35: 521 – 529.
Sailer, I., Philipp, A., Zembic, A., Pjetursson, B. E., Hämmerle, C. H. F. & Zwahlen, M. (2009) A systematic review of the performance of ceramic and metal implant abutments supporting fixed implant reconstructions. Clinical Oral Implants Research 20 Suppl 4: 4 – 31.
Sailer, I., Strasding, M., Valente, N.A., Zwahlen, M., Liu, S. & Pjetursson, B. E. (2018) A systematic review of the survival and complication rates of zirconia-ceramic and metal-ceramic multiple-unit fixed dental prostheses. Clinical Oral Implants Research 29 Suppl 16: 184 – 198.
Schmid, E., Roccuzzo, A., Morandini, M., Ramseier, C. A., Sculean, A. & Salvi, G. E. (2021). Clinical and radiographic evaluation of implant-supported single-unit crowns with cantilever extension in posterior areas: A retrospective study with a follow-up of at least 10 years. Clinical Implant Dentistry and Related Research 23: 189 – 196.
Stawarczyk, B., Özcan, M., Schmutz, F., Trottmann, A., Roos, M. & Hämmerle, C. H. F. (2013) Two-body wear of monolithic, veneered and glazed zirconia and their corresponding enamel antagonists. Acta odontologica Scandinavica 71: 102 – 112.
Stober, T., Bermejo, J. L., Schwindling, F. S., and Schmitter, M. (2016). Clinical assessment of enamel wear caused by monolithic zirconia crowns. Journal of Oral Rehabilitation 43: 621 – 629.
Thoma, D. S., Brandenberg, F., Fehmer, V., Knechtle, N., Hämmerle, C. H. & Sailer, I. (2016) The Esthetic Effect of Veneered Zirconia Abutments for Single-Tooth Implant Reconstructions: A Randomized Controlled Clinical Trial. Clinical Implant Dentistry and Related Research 18: 1210 – 1217.
