Alexakou, E., Damanaki, M., Zoidis, P., Bakiri, E., Mouzis, N., Smidt, G., & Kourtis, S. PEEK High performance polymers: A review of properties and clinical applications in prosthodontics and restorative dentistry. Eur J Prosthodont Restor Dent 2019;27:113-121.
Altarazi, A., Haider, J., Alhotan, A., Silikas, N., & Devlin, H. Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application. Dent Mater 2022;38:1841-1854.
Baba, N. Z., AlRumaih, H. S., Goodacre, B. J., & Goodacre, C. J. Current techniques in CAD/CAM denture fabrication. Gen Dent 2016;64: 23-28.
Baba, N. Z., Goodacre, B. J., Goodacre, C. J., Muller, F., & Wagner, S. CAD/CAM Complete denture systems and physical properties: A review of the literature. J Prosthodont 2021;30:113-124.
Barao, V. A., Assuncao, W. G., Tabata, L. F., de Sousa, E. A., & Rocha, E. P. Effect of different mucosa thickness and resiliency on stress distribution of implant-retained overdentures-2D FEA. Comput Methods Programs Biomed 2008;92:213-223.
Bertotti, K., Mwenge-Wambel, J., Sireix, C., Hue, O., Jeannin, C., & Grosgogeat, B. Accurate analysis of titanium and PolyEtherEtherKetone materials as an alternative to cobalt-chrome framework in removable partial denture: A systematic review. Dent Mater 2024;40:1854-1861.
Bieger, V., Thieringer, F. M., Fischer, J., & Rohr, N. Fibroblast behavior on conventionally processed, milled, and printed occlusal device materials with different surface treatments. J Prosthet Dent 2023;129:939-945.
Bilgin, M. S., Baytaroglu, E. N., Erdem, A., & Dilber, E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent 2016;10:286-291.
Boven, G. C., Raghoebar, G. M., Vissink, A., & Meijer, H. J. Improving masticatory performance, bite force, nutritional state and patient’s satisfaction with implant overdentures: a systematic review of the literature. J Oral Rehabil 2015;42:220-233.
Cherneva, S. P., V.; Petkov, V.; Bogdanov, V.; Simeonova, S. Microstructure and mechanical properties of 3D-printed dental Co-Cr alloys, produced with the use of selective laser melting. Acta of Bioengineering and Biomechanics 2024;25:29-40.
de Freitas, B. N., Tonin, B. S. H., Zaparolli, D., Faria, A. C. L., Toniollo, M. B., Ribeiro, R. F., & Macedo, A. P. Mechanical comparison of milled fiber-reinforced resin composite and Co-Cr frameworks with different connector cross-sectional geometries: An in vitro study. J Mech Behav Biomed Mater 2023;141:105759.
Deeban, Y. Effectiveness of CAD-CAM milled versus DMLS titanium frameworks for hybrid denture prosthesis: A narrative review. J Funct Biomater 2024;15:376.
Duncan, J. P., Freilich, M. A., & Latvis, C. J. (2000). Fiber-reinforced composite framework for implant-supported overdentures. J Prosthet Dent 2000;84:200-204.
Eggmann, F., & Blatz, M. B. Recent advances in intraoral scanners. J Dent Res 2024;103:1349-1357.
El-Shaheed, N. H., Lamfon, H. A., Salama, R. I., Faramawy, A. M. G., & Mostafa, A. Z. H. Tissue surface adaptation and clinical performance of CAD-CAM milled versus conventional implant-assisted mandibular overdenture. Int J Dent 2022;8220233.
Ellakany, P., Madi, M., Elwan, A. H., Alshehri, T., Aljubran, H., & Aly, N. M. Influence of CAD-CAM manufacturing methods on the accuracy and mechanical properties of implant-supported prostheses: A systematic review. J Prosthodont 2024 [in press].
Fouda, S., Ji, W., Gad, M. M., AlGhamdi, M. A., & Rohr, N. Flexural strength and surface properties of 3d-printed denture base resins-effect of build angle, layer thickness and aging. Materials (Basel) 2025;18:913.
Gama, L. T., Bezerra, A. P., Schimmel, M., Rodrigues Garcia, R. C. M., de Luca Canto, G., & Goncalves, T. Clinical performance of polymer frameworks in dental prostheses: A systematic review. J Prosthet Dent 2024;131:579-590.
Gomaa, A. M., Mostafa, A. Z. H., & El-Shaheed, N. H. Patient satisfaction and oral health-related quality of life for four implant-assisted mandibular overdentures fabricated with CAD/CAM milled poly methyl methacrylate, CAD/CAM-milled poly ether ether ketone, or conventional poly methyl methacrylate: A crossover clinical trial. J Oral Rehabil 2023;50:566-579.
Goodacre, B. J., & Goodacre, C. J. Additive manufacturing for complete denture fabrication: A narrative review. J Prosthodont 2022;31:47-51.
Hack, G., Liberman, L., Vach, K., Tchorz, J. P., Kohal, R. J., & Patzelt, S. B. M. Computerized optical impression making of edentulous jaws – An in vivo feasibility study. J Prosthodont Res 2020;64:444-453.
Heydecke, G., Boudrias, P., Awad, M. A., De Albuquerque, R. F., Lund, J. P., & Feine, J. S. Within-subject comparisons of maxillary fixed and removable implant prostheses: Patient satisfaction and choice of prosthesis. Clin Oral Implants Res 2003;14:125-130.
Khorasani, E., Mokhlesi, A., Arzani, S., Ghodsi, S., & Mosaddad, S. A. Are there clinical differences between 3d-printed and milled complete dentures? A systematic review and meta-analysis. Int Dent J 2025;75:464-473.
Le Bars, P., Bandiaky, O. N., Le Guehennec, L., Clouet, R., & Kouadio, A. A. Different polymers for the base of removable dentures? Part I: A narrative review of mechanical and physical properties. Polymers (Basel) 2023;15:3495.
Lee, W. J., Jo, Y. H., Yilmaz, B., & Yoon, H. I. (2023). Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing. J Dent 2023;135:104598.
Li, P., Lambart, A. L., Stawarczyk, B., Reymus, M., & Spintzyk, S. Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity. J Dent 2021;115:103856.
Murakami, N., Wakabayashi, N., Matsushima, R., Kishida, A., & Igarashi, Y. Effect of high-pressure polymerization on mechanical properties of PMMA denture base resin. J Mech Behav Biomed Mater 2013;20:98-104.
Nabil, M. S., Mahanna, F. F., & Said, M. M. Evaluation of masticatory performance and patient satisfaction for conventional and 3D-printed implant overdentures: a randomized crossover study. BMC Oral Health 2024;24:672.
Park, K., Kang, N. G., Lee, J. H., & Srinivasan, M. Removable complete denture with a metal base: Integration of digital design and conventional fabrication techniques. J Esthet Restor Dent 2024;36:255-262.
Revilla-Leon, M., Sadeghpour, M., & Ozcan, M. A review of the applications of additive manufacturing technologies used to fabricate metals in implant dentistry. J Prosthodont 2020;29:579-593.
Sadowsky, S. J., & Zitzmann, N. U. Protocols for the maxillary implant overdenture: A systematic review. Int J Oral Maxillofac Implants 2016;31:182-191.
Şahin N, K. N., Tekin EN. Attachment systems in implant-supported removable dentures: Update for clinicians. Lokman Hekim Health Sci 2024;4:114-120.
Saravi, B., Ilbertz, J., Vach, K., Kohal, R. J., & Patzelt, S. B. M. Accuracy of computerized optical impression making in fabrication of removable dentures for partially edentulous jaws: An in vivo feasibility study. J Funct Biomater 2023;14:458.
Schmidt, M. B., Rauch, A., Schwarzer, M., Lethaus, B., & Hahnel, S. Combination of digital and conventional workflows in the CAD/CAM-fabrication of an implant-supported overdenture. Materials (Basel) 2020;13:3688.
Shim, J. S., Kim, J. E., Jeong, S. H., Choi, Y. J., & Ryu, J. J. Printing accuracy, mechanical properties, surface characteristics, and microbial adhesion of 3D-printed resins with various printing orientations. J Prosthet Dent 2020;124:468-475.
Stilwell, C., Jung R., Beuer, F., Brunello, G., Cha, J., Chua Keng Ling, …, Zitzmann, N.U. Consensus report of Group 4 of the 1st Global Consensus for Clinical Guidelines for the rehabilitation of the edentulous maxilla: conventional dentures, implant overdentures and implant-supported fixed dental prostheses. Clinical Oral Implants Research 2025; [under review].
Suzaki, N., Yamaguchi, S., Hirose, N., Tanaka, R., Takahashi, Y., Imazato, S., & Hayashi, M. Evaluation of physical properties of fiber-reinforced composite resin. Dent Mater 2020;36:987-996.
Van de Winkel, T., Delfos, F., van Oirschot, B., Maal, T., Adang, E., & Meijer, G. budget impact analysis: digital workflow significantly reduces costs of implant supported overdentures (IODs). Clin Implant Dent Relat Res 2025;27:e13413.
Van de Winkel, T., Heijens, L., Listl, S., & Meijer, G. What is the evidence on the added value of implant-supported overdentures? A review. Clin Implant Dent Relat Res 2021;23:644-656.
Vincze, Z. E., Nagy, L., Kelemen, K., Cavalcante, B. G. N., Gede, N., Hegyi, P., . . . Marton, K. Milling has superior mechanical properties to other fabrication methods for PMMA denture bases: A systematic review and network meta-analysis. Dent Mater 2025;41:366-382.
Wei, X., Pan, Y., Wang, M., Wang, Y., Lin, H., Jiang, L., …, Cheng, H. Comparative analysis of leaching residual monomer and biological effects of four types of conventional and CAD/CAM dental polymers: an in vitro study. Clin Oral Investig 2022;26:2887-2898.
Wong, D. M., Cheng, L. Y., Chow, T. W., & Clark, R. K. Effect of processing method on the dimensional accuracy and water sorption of acrylic resin dentures. J Prosthet Dent 1999;81:300-304.
Yan, L., Xie, B., Li, Y., Liu, Z., Huang, Y., He, B., …, Chen, F. Global burden of oral disorders with projections over the next 30 years. J Periodontol 2025; [in press] doi:10.1002/JPER.24-0638.
Zhou, Y., Li, N., Yan, J., & Zeng, Q. Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods. J Prosthet Dent 2018;120:617-623.
Zitzmann, N. U., & Marinello, C. P. Treatment plan for restoring the edentulous maxilla with implant-supported restorations: removable overdenture versus fixed partial denture design. J Prosthet Dent 1999;82:188-196.
Zitzmann, N. U., & Marinello, C. P. A review of clinical and technical considerations for fixed and removable implant prostheses in the edentulous mandible. Int J Prosthodont 2002;15:65-72.
